HVC Flexpod - C & A Series
THE VERSATILE HVC FLEXPOD
The Benro HVC FLEXPOD features a patented, multi-function center column that can be positioned vertically or horizontally to provide optimum camera positioning to meet the needs of most any assignment. In the standard vertical position, the column works in a conventional manner. In the horizontal position, the center column offers you the freedom to position the camera in difficult and/or limited access areas, including the ability to extend the camera beyond range of the tripod legs when photographing flat art or similar subjects at floor level. The HVC Flexpod offers of all the features found on both the C–series carbon fiber tripods and A-series aluminum tripods, making it an excellent choice for both studio and location shooting.
Available in 2nd Generation Carbon Fiber Tube or Machined Aluminum
In a short time span the Benro nameplate has firmly established itself among pros and serious amateurs alike as an uncompromising, world-class camera support system designed to perform smoothly and reliably in the studio or in the field.
By integrating advanced technologies into the manufacturing process, Benro’s engineering team has managed to reduce the wall thickness of carbon fiber tripod leg tubes down to 1.0 mm (from 1.5 mm) without compromising the integrity – i.e. the structural, rigidity, anti-twisting, or vibration-dampening qualities of previous Benro carbon fiber tripods. As a result, Benro’s 2nd-generation, carbon fiber tripods are 15% lighter, 40% stronger in load pressure, and 80% stronger laterally than earlier models, making them 60% stronger overall when compared to competitive brands.
And the legs on all Benro Aluminum tripods are machined to a uniform thickness of 1.5 mm to best ensure a sturdy, cost effective alternative shooting platform.
Adjustable Leg Angles
For an extra measure of flexibility, Benro tripod legs can be independently locked into place at 24, 55, or 80-degree angles to enable shooting in cramped quarters or on irregular surface areas. For lower-elevation shooting, the tripod legs can be spread at near-parallel angles to the ground.
Column-Locking Setknobs
The angle and position of the adjustable center-column can be locked into place with a single twist of the center-column setknob.
Anti-Rotation Leg Locking System
A new anti-rotation feature prevents unwanted leg rotation even when the legs aren’t locked into place, enabling fast and fumble-free camera set-up times.
Reversible Center Column
The center column, which features a ridge-and-groove design to eliminate unwanted column rotation, can be quickly inverted for exacting, lower angle camera positioning.
Patented Dust-Resistant Rubber Lock Grips
Benro's innovative rubberized locking grips offer levels of weather and dust-resistance not found on alternate brand tripods. Once locked into position, sensitive threaded areas are sealed and protected from dust, sand, dirt and water, any of which can lead to costly repairs.
Patented Water Resistant Bushing Design
Most manufacturers use paper-based sleeve bushings, which over time absorb moisture and break down. Benro employs a patented, weather-resistant tap lock bushing system that is guaranteed to outlast and outperform the bushing systems used by competitive, and costlier brands.
Head Mounting Setscrews
Three opposed setscrews provide an extra level of security when attaching the head to the tripod’s top-plate. Once secured into place, each of the setscrews can be tightened down to prevent the head from slipping and rotating out of position when the tripod is angled off center.
Spirit Level and Compass
In or out of the studio, a built-in spirit level helps keep your camera squared-off and level to your subject. In addition, a built-in compass provides orientation coordinates for recording precise camera positioning data.
Stainless Steel Spikes or Rubber Feet
As shooting conditions vary, Benro tripods come equipped with a choice of screw-in rubber feet or stainless steel spiked feet. The rubber feet provide a positive, secure grip on smoother floor surfaces, while the stainless steel spikes ensure better stability when shooting in soil, sand, rocky cliffs or other non-stable terrain.
Center-Column Hook
A hook, located on the bottom of the center-column, allows you to hang additional weight from the tripod’s center of gravity for increased stability.
Wing nut-style Column Lock
A wing nut-style center column-locking knob allows for secure, intuitive-action height adjustments on the fly.
Closed-Cell Foam Grip
To provide a comfortable yet firm grip when carrying your Benro tripod, a thick layer of closed-cell nitrile butadiene rubber (NBR) wraps around one of the leg surfaces, which makes carrying and working with the tripod a far more comfortable ordeal when shooting in cold environments.
Tripod Bags
Benro bags are made of top quality materials to provide the highest level of protection and ease of transport for your tripod and head.
Shoulder Strap and Carry Case
Benro straps and carrying cases are made of quality, high-durability materials to provide maximum protection for your tripod and head. The patented shoulder strap, included with every Benro Flexpod, can be used interchangeably as a strap for the tripod or tripod bag.